Fischer - Polyurethane Adhesive Fastgrip 800 KH2P_GAE970

Product details:

FASTGRIP polyurethane adhesive for insulation panels and plasterboard polyurethane adhesive for bonding insulation panels, gypsum boards and ground blocks nonstructural Materials support It adheres to all standard support materials such as * Concrete * Masonry * Wood * Gypsum plasterboard * Elements anodized * Metals * Aerated autoclave (cellular) * Plastics (not on PE, PP, PTFE, silicone) * Plaster * Stone Advantages * FASTGRIP 800 has been tested at accredited according EOTA ETAG 004 and TR046. * A cylinder FASTGRIP 800 is equivalent to about 30 kg of cement-based adhesive and is sufficient to install between 8 ÷ 12 m of insulating panel. * FASTGRIP M750 has been tested internally according EOTA ETAG 004 and TR046. * One cylinder of FASTGRIP M750 equals approximately 28 kg of adhesive cement based and is sufficient to install between 6 ÷ 9 m of insulating panel. * High acoustic and thermal insulation capacity. * Low expansion during curing, no post-expansion and shrinkage after curing. * CFC and H-CFC. * Also ideal for bonding plasterboard. * Allows leveling plates on the vertical plane, horizontal and depth Applications Suitable for fixing insulating panels (in conjunction with mechanical fastening) type * Panels of expanded polystyrene (EPS) * Panels extruded polystyrene (XPS) * Panels in mineral wool (MW-panel) * Slats made mineral wool (MW-lamella) Also suitable for bonding * Plasterboard Panels | * Elements rectified in internal partition walls (non-structural) * Water barrier films and vapor barrier as STRIP STRIP INSIDE and OUTSIDE mountwindows * Electrical and corrugated pipes for electrical installation boxes * A shower trays Positioning Function * Remove from the surfaces to be bonded dirt, oil, grease and dust. * Vigorously shake the bottle with the valve upside down at least 20 times before use and screw the spout (FASTGRIP M750) or the Fischer gun PUPN 1 or 3. * PUPM * Moisten surfaces with a water sprayer prior to application. * Apply the adhesive foam on the edges of the panel and then on